Everything you need to measure complete cholesterol with Europe's #1 cholesterol meter. Recommended by leading cardiovascular physicians, laboratories, healthcare professionals and consumers.

The results are comparable to the laboratory and allow continuous monitoring of all cholesterol parameters: Total cholesterol CHOL, HDL-cholesterol, LDL-cholesterol, triglycerides and the cholesterol ratio.< /p>

Test results in 1 minute with just a few drops of blood and 1 single test strip.

The Mission 3-in-1 cholesterol meter is praised for its accuracy. Used daily by thousands of doctors, clinics, laboratories, healthcare professionals and consumers.

• Highly accurate blood cholesterol measurement
• Determines all cholesterol values: total cholesterol, HDL, triglycerides, LDL and cholesterol ratio with a single test strip. Calculates cardiovascular risk
• Only 35 μL blood from the fingertip
• Easy to use, suitable for both professional and home use
• All values are displayed after using the 3 in 1 strip and stored in the meter's memory
• Can be set to mg/dl or mmol/l
  CHOL: 100-500 mg/dl (2.59-12.93 mmol/l) (≤ 5.0%)
  HDL: 30-100 mg/dl (0.78-2.59 mmol/l) (< 5.0%)
  TRIG: 100-650 mg/dl (1, 13-7.34 mmol/l) (< 5.0%)

The highly accurate Mission 3 in 1 Cholesterol offers advanced performance:

• Suitable blood from fingertip or venous whole blood, serum or plasma
• Reliable detection using reflection photometry wavelengths 635nm
• Automatic calibration with code chip
• Memory for 200 full cholesterol results with time and date
• 4 AAA or AC adapter (Mini USB, 5V DC, 50 mA)
• Auto shut-off 5 minutes
• Long battery life ≥ 1,000 tests
• Wide operating temp. range 15-40 ° C (59-104 ° F); enables testing almost anywhere
• Relative humidity when operating 10 – 90%
• Meter dimensions (L x W x H) 137mm × 79mm × 26mm (5.4 “x 3.1” x 1.0 “)
• Large display 50mm x 50mm
• Lightweight 145 grams, excluding batteries
• PC interface for data transfer to PC Mini USB port
• CE0123 certified

Content*:

• Acon Mission Cholesterol Meter
• 5x Mission 3-in-1 cholesterol test strips incl. code chip
• 5x safety lancing devices28G
• 5x blood transfer capillaries
• 4 Batteries
• 1 Pouch
• 2 Control Strips
• Manual

Preparation

Meter Setup: You must configure the meter before first use. This only needs to be done once. Watch the videos below for the first setup and testing. 

*Control fluid (for laboratories only), lancing device and sterile lancets are not part of this type of starter pack. 

Quick setup pdf:

Dutch
Deutsch
Français

Documentation:

Mission documents

PCSoftware:

PC interface software can be downloaded here